This page includes the documentation, firmware, and software for all Netopia hardware products that are no longer supported by Netopia Technical Support (As of 12/31/00). If you would like more information about our router swap upgrade program, please contact Netopia Customer Support at 510-597-5400, ext. 1.
Product Numbers for Discontinued Products:
- 2E-H
- 3220-H
- 3220-H-002
- 3220-H-006
- 3347W (3/15/2007)*
- 3347WG
- 3347WG-VGx
- 3347W-ENT
- 3366-ENT
- 3381-ENT
- 3387WG
- 3387W-ENT (3/15/2007)*
- 400/600 ISDN
- 4553
- 4653-XL
- 4741 2A4NA
- 4752 2A4NA
- 4753 2A4NA
- 8347W
- 8387W
- D7100 SDSL/DSU Router
- ISDN Modem
- ISDN Modem PC Card
- M7100 SDSL Modem
- PN412 **
- PN415 **
- PN611 ***
- PN612 ***
- PN615 ***
- PN660-T1***
- PN660-DDS***
- PN660-SA***
- PN400/600 Series
- R2121 Dual Analog Router
- R3100-Rhythms
- R3200-I (12/1/2006)*
- R3232-I
- R5100 (12/1/2006)*
- R5200 (12/1/2006)*
- R5320
- R5320-XL (12/1/2006)*
- R6100
- R6100 ADSL Router
- The latest R6100 daughtercard firmware, version 1.1.3, includes the latest Alcatel firmware, version 3.6.70.
- R6131
- R7100-C
- R7200
- R7200 SDSL Router
- In order to take advantage of 4.10 and above firmware features,
you need to upgrade to the new R7200 daughtercard firmware, version 1.1.8.
- In order to take advantage of 4.10 and above firmware features,
- R7200-XL
- R9100 (12/1/2006)*
- R9120-XL (12/1/2006)*
- S9500 Security Device
- TER/20 (12/1/2006)*
- TER/31S (12/1/2006)*
- TER/31U (12/1/2006)*
- TER/31UP (12/1/2006)*
- TER/51 (12/1/2006)*
- TER/61 (12/1/2006)*
- TER/72 (12/1/2006)*
- TER/AD1 (12/1/2007)*
- TER/WPC11N1
- TER/WUSB11N1
* Indicates future date
** Last tested compatible operating system: Macintosh OS 8.5
*** Last tested compatible operating system: Windows 95
Discontinued Support Categories:
Firmware, Setup Programs, and Modem Scripts:
Firmware:
- Latest Firmware for 411/611
- Latest Firmware for 412/612
- Firmware for 415/615
- Firmware for 435/455/635/655
- Firmware for 400/440/450/600/640/650 for SN below 6308101
- Firmware for 400/440/450/600/640/650 for SN above 6308101
- Latest daughtercard Firmware for the R6100 ADSL Router
- Latest daughtercard Firmware for the R7200 SDSL Router
Macintosh: Setup Programs
Macintosh: ISDN Modem/PC Card Scripts
Windows: Setup Programs
Smart Start Installation Program for 400/600 series
400/600 PN-Series
Technotes:- NIR_011: Cisco Configuration
- NIR_040: Applications Incompatible with Network Address Translation (NAT)
- NIR_048: Back Revving Firmware
- NIR_057: User Interface Differences Between Netopia 400/600 Series and R-Series Routers
- NQG_001: Setting up a continuous 24-Hour connection on a 400/600 Series Netopia Router
- NQG_007: How to reset a PN-Series Netopia router to factory defaults
- NQG_008: Netopia Quick Guide: Setting up Exported Services on a 400/600 Series Netopia router that is running Smart IP(NAT)
- NQG_019: Setting up Exported Services on a Netopia R-Series Router that is running NAT
- NQG_020: Setting up a continuous 24-Hour connection on a Netopia R-Series Router
- NQG_021: Upgrading Router Firmware via TFTP or Xmodem File Transfer
D7100 SDSL/DSU Router
Tech Notes: Upgrades: Manual:
R2121 Dual Analog Router
Tech Notes: Quick Guides:- NQG_012: How to configure an Ascend router to receive MP+ calls from a Netopia Dual Analog (R2121) router
- NQG_018: Creating a Point-to-Point Connection Between Two DOD Routers
R6100 ADSL Router
Data Sheet
R7200 SDSL Router
Data Sheet
ISDN Modem
ISDN PC Card
S9500 Security Device:
Quick Guides:- NQG_030 Lost Password - How to Reset the S9500 to Factory Defaults
- NQG_031 How to Configure the Netopia S9500 to Accept Pings (ICMP)
- NQG_032 Adding an Address in the Netopia S9500 Security Appliance
- NQG_033 Adding a Custom Service (Timbuktu) to the Netopia S9500
- NQG_034 Creating a Policy in the Netopia S9500 Security Appliance
- NQG_049: Configuring a Netopia S9500 Security Appliance to accept an IPSec Tunnel from a computer using IRE's SafeNet VPN client
- NIR_070 Configuring the S9500 Security Appliance in NAT Mode
- NIR_071 Using Virtual & Mapped IP Addresses in the Netopia S9500
- NIR_072 Creating an IPSec Tunnel to an S9500 from a Netopia Remote Client
- NIR_073 Creating an IPSec Tunnel between two Netopia S9500s
- NIR_074 Using the Netopia Remote Software with a DSL/Cable Modem or LAN Connection
- NIR_076 Creating an IPSec tunnel between a Netopia R-Series router and the Netopia S9500 Security Appliance
- NIR_079: Known S9500 Issues